Helicopter IFR Technique: Communications – Declaring an Emergency
You don’t have to be in distress to declare an emergency.
AIM 6-1-2 explains that an emergency can be either a distress or an urgency condition. The Pilot/Controller Glossary defines urgency as a safety concern requiring timely, but not immediate, assistance—a potential distress condition.
That distinction matters. There is a human tendency to avoid drawing attention to ourselves or inconveniencing others. In the cockpit, that reluctance can cause us to delay asking for help while our options narrow.
As a rescuer, I regularly participated in decisions to hoist someone who was not yet in immediate danger. We could see where the situation was headed. Leaving that person in place would likely make a later rescue more difficult and dangerous. We accepted some risk in the hoist to reduce significant future risk to both the individual and our helicopter crew.
Declaring an emergency during an urgency condition serves a similar purpose. It brings ATC into the problem early and gives controllers time to help you get safely on the ground before the situation deteriorates.
It can also give ATC latitude to depart from normal procedures or minima when necessary to assist. The options depend on the circumstances, including terrain, traffic, and the nature of the emergency.
I experienced that flexibility years ago while flying a helicopter equipped with deicing systems. We were in icing conditions when the tail rotor deicing system failed. I declared an emergency. ATC provided a lower altitude and shortened our vectors to an ILS, helping us exit the icing conditions expeditiously.
We still had options, and declaring the emergency helped us use them.
If you are becoming doubtful about your ability to continue safely, tell ATC what is happening and what you need. Don’t wait for an urgency condition to become a distress situation before engaging ATC.
Also, be prepared to provide the number of people on board—often called “souls on board”—and fuel remaining in minutes. That fuel estimate is the approximate time you can continue flying until fuel exhaustion, including reserve fuel. If workload permits, including these details when you declare, can save some back-and-forth. But don’t delay your initial call to gather them. If ATC requests information during a time-critical situation, prioritize flying the aircraft and tell them to “stand by.” Provide the details once workload permits.
Furthermore, using the proword “mayday” three times is the absolute best way for declaring a time-critical emergency. It will silence the radios and the controller will have the ability to focus on your call sign and your description of the emergency which will avoid a transmission getting blocked or inefficient back and forth such as – “aircraft declaring an emergency say again call sign,”
If you’re in distress and need immediate assistance, start your call with “MAYDAY, MAYDAY, MAYDAY.” That gives your transmission priority and tells everyone else on the frequency to keep it clear. On a busy frequency, that can help the controller catch your call sign and hear what’s happening the first time, saving an additional transmission such as “Aircraft declaring an emergency, say again your call sign” when seconds count.
